hv-connectors from GES
HomeProductsModular HV-Connectors

High Voltage Connectors - modular

Series MOD, Type HP

Series MOD HP covers a portfolio of pre-configured modular multi-pin high voltage connectors based on our HiPro HV-Module. The modular concept of these HV connectors allows combinations of up to seven 2-pin high voltage modules. The HiPro HV-Modules allow operating voltages up to 12 kV DC at a rated current of 25 A and are inserted into the housing together with the module frame. The splash and dust-proof housing is in accordance to protection class IP65 and availabel also with an angled cable entry. It is closed with a practical locking lever and resists even the harshest mechanical exposure.

high voltage connector Series MOD

Characteristics

  • Operating voltage: 12 kV DC
  • Testing voltage: 18 kV DC
  • Rated current: 25 A
  • Contact resistance: ≤ 2 mΩ
  • Number of pins: 2 - 14
  • Termination method: solder/ crimp
  • Wire size: AWG 20-12
  • Protection class: IP 65
  • Flammability: UL94 V-0

Benefits

  • Rugged housing
  • Practical locking-latch
  • High protection class
  • Combinable with other modular inserts
  • Various options for wire size
  • Recessed contacts
  • Simple modular system
  • Quick and easy assembly

Typical Applications

  • UV-Systems
  • Electron accelerators
  • Non-destructive testing
  • ...

Series MOD, Type T

Series MOD T also covers a portfolio of pre-configured modular multi-pin high voltage connectors based on our PTFE HV-Module. Again, the modular concept of these HV connectors allows for combinations of up to seven 2-pole high voltage modules. The PTFE HV-Module allow operating voltages up to 12 kV DC at a rated current of 30 A and are inserted into the housing together with the module frame. The splash and dust-proof housing is in accordance to protection class IP65 and availabel also with an angled cable entry. It is closed with a practical locking lever and resists even the harshest mechanical exposure.

high voltage connectors Series MOD

Characteristics

  • Operation voltage: 12 kV DC
  • Testing voltage: 18 kV DC
  • Rated current: 30 A
  • Contact resistance:  300 µΩ
  • Number of pins: 2 - 14
  • Termination method: solder
  • Wire size: 2,5 mm²
  • Protection class: IP 65
  • Flammability: UL94 V-0

Benefits

  • Rugged housing
  • Practical locking-latch
  • High protection class
  • Combinable with other modular inserts
  • Simple modular system
  • Quick and easy assembly
  • High quality contacts for up to 100 k mating cycles

Typical Applications

  • UV-Systems
  • Electron accelerators
  • Non-destructive testing
  • ...

Series MOD, System Components

Besides the above described pure high voltage connector configurations the rugged industrial connector system of Series MOD allows any combination with other modules. Therefor customized configurations for complex applications can easily be assembled and implemented. Series MOD is particularly suitable when different connection tasks such as high voltage, power, pneumatic and control signals a beneficial in a compact and single IP65 connection. Furthermore, the system is compatible with Amphenol Heavymate C 146M, Lapp EPIC MC, Weidmüller ConCept, Wieland revos Flex et al.

high voltage connectors Series MOD

Modules available for:

  • High voltage, 2 Pin per module, up to12 kVDC
  • Signal transmission, 3 - 20 pin per module, up to 630 V
  • Coaxial, 3 pin per module, 250 V
  • Data transmission, RJ45 CAT5e / USB Type 2, 4 x 400 V contacts
  • Diverse frames and housings for up to 7 modules

Benefits

  • High flexibility in small space
  • Minimum cable length
  • Very service and maintenance friendly
  • Various application specific combinations
  • International standardized, widely spread
  • Compatible with: Amphenol Heavymate C 146M, Lapp EPIC MC, Weidmüller ConCept, Wieland revos Flex u.a.

Typical Applications

  • Universally applicable